|
Instructions:
1. First, cover the half of the tag with pink flowered scrapbook paper found in the pad. Cover the other half with the brown and pink flower paper.
2. Cut a strip of brown cardstock that measures the width of the tag and is 2 cm high. Poke holes along the edge of the entire piece and then glue down onto the middle of the tag, covering where the 2 papers meet.
3. Punch a hole in both the top and the bottom left side of the tag and insert the 2 brads.
4. Secure the 5 acrylic beads onto the wire and then wrap the wire ends around the brads. Cut off any excess length of wire.
5. Stamp “happy day” onto the pink top part of the tag using the brown pigment ink. Cover the image with clear embossing powder and heat emboss.
6. Create the bubble buttons by placing the bubbles over a flower image on the scrapbook paper. Cut around bubble.
7. Use 3-D double sided foam tape to attach the bubbles onto the tag.
8. Tie a matching satin ribbon through the hole at the top of the tag.
This is the basic tag form. It measures 10 x 5 cm. Of course, you can cut thick cardstock to a rectangular shape of this measurement and it will work just as well.
 |
