|
Instructions:
1. You can either print out the pattern and transfer onto black construction paper using a white pencil. Lay this sheet over a second sheet and then cut out simultaneously... Or print out the pattern and glue the pattern onto one side of a sheet of black paper and cut out the design. This side with be the inside of the project. Place this now onto a second sheet of construction paper and again traced and cut out.
2. To fill out the spaces, you will now place an appropriately colored sheet of tissue paper sheets over a particular area of the design. Follow around the black outline of the area to get the shape. Cut the tissue paper shape out and glue it to the appropriate space. Continue in this manner until the entire project is covered. Now place the second cut out sheet of black paper over this working side to cover it up. Now both sides of the project can be seen.
This tutorial shows you an example of how a pumpkin was made in the same manner. >>> Paper Pumpkin Tutorial
|
