|
Instructions:
Tip: After adding each new piece of paper, cut excess paper away by turning tag over and trimming along the edge.
1.First of all, cover the tag with the first paper of choice. Punch out the hole at the top.
2. Cover the tag now with a torn piece of the second paper. It does not have to look perfect and should be long enough to cover the left hand side of the tag.
3. Emboss a piece of solid colored piece of paper and then cut it to fit the bottom of the tag.
4. Die cut the blossoms. Glue these and the half beads to the tag. To finish the tag off, tie a ribbon at through the top hole.
|
