|
Instructions:
1. Using the Fiskars Shape Boss, emboss the rose motif and cut it out leaving a 1/4” margin around the rose.
2. Tear a piece of the white fiber paper and glue it onto the blue blank card.
3. Cut a piece of the blue fiber material and put aside.
4. Cut the birthday message out. Lay the blue fiber piece on the card and the message over it. Using the hole punch, punch these pieces through the front of the card. Use the fasteners and secure the pieces on the card. Use the picture as reference.
5. Attach 3-D pads to the back of the rose and remove the protective backings. Stick the rose on the card as seen in the picture.
|
